— is the first and the only organic line of products in Russia for natural and artificial fur care.
The entire BIOFUR line contains no preservatives; it is environmentally friendly and biologically safe when using. According to the medical report of Sanitary and Epidemiological Supervision, any fur treated with BIOFUR products is hypoallergenic and safe for health. BIOFUR product is an integral part of every lady’s handbag and an indispensable tool in the set of household wares for any housewife.
First of all BIOFUR products eliminate general contamination – such as atmospheric precipitation, dust, dirt, foodstuff stains, grease in places of frequent contact with human skin, as well as certain chemical contaminations caused by traces of beauty products on lapels and collars, and traces of footwear and road dirt on hems.
Secondly, BIOFUR products allow maintaining the original appearance of fur and fur products due to saturation and enrichment with useful substances aimed at restoring the living structure of fur, and prolong the life of the products.
Secondly, BIOFUR products allow you to maintain the original appearance of fur products because they saturate and enrich the fur with useful substances helping to restore the living structure of the fur, and prolong lifetime of fur products.
Prophylactic set BIOFUR for regular care of fur products and fur cleaning. It includes:
Wet cleaning napkins for EXPRESS-CARE and fresh stains removal.
BIOFUR Cleaner is used for thorough fur cleaning and removal of all kinds of easily removable contaminations. Due to a special combination of natural components BIOFUR Cleaner quickly and effectively removes easily removable contaminations without damaging your fur garment.
BIOFUR soap is used for through removal of all kinds of local contaminations from your fur garment.
BIOFUR Limited Liability Company is the only company in Russia which produces a range of namesake home fur care products. For the first time, BIOFUR products were presented at the international exhibition in Hong Kong in February 2014 and attracted great interest among the representatives of wholesale and retail chains that sell fur products, as well as manufacturers and representatives of service centers and dry cleaners.
BIOFUR is a fundamentally new culture of fur wearing. Let’s have a retrospective journey into the history. Thirty years ago there were no such kinds of mass consumption goods as:
Today, we see these products on store shelves and their daily use has not only became a part of our lives, but has also turned into a daily habit.
And now think of those who were the first to make good BUSINESS on these new products and habits. After receiving an information about BIOFUR products, which confidently enter the world market, you can become ONE OF THE FIRST together with us!!! BIOFUR is looking for Partners with years of successful experience in the field of distribution, from all regions of Russia, as well as near and far abroad.
BIOFUR products sold in fur shops will allow you to increase shop traffic. Your client who bought BIOFUR product once will come back regularly to buy a new fur care product in order to keep original look of their furs, and that would allow you to increase sales of your whole range of goods.
BIOFUR offered in your studios will allow you to increase your income, rendering new services – cleaning dirty fur products that lost their original look, and selling sets of BIOFUR products to your clients.
BIOFUR products will allow you to offer a new service – bio – cleaning using BIOFUR products that will attract new clients and increase confidence of the existing ones.
For fur sheepskin, ennobling the hair cover (applying a chandelier and fixing it) during dressing is especially important, because in its natural form the hairline is characterized by low performance properties: it quickly loses its shine, becomes easily adorned, and acquires an unattractive appearance. This is explained by the peculiarities of the structure of the hair covering of fur sheepskins: a rather long hair length, high natural crimpiness, high triboelectric properties (the ability to quickly electrify, accumulate a large electric charge, and keep it for a long time).
The obedience of sheepskin is actually a complex of chemical, physico-mechanical and thermomechanical processes and operations that result in changes in the shape of the hairline and in its constituent hair, and also ensure the stability of the effect obtained.
When the sheepskin is ennobled, the plasticization of the hair is carried out by repeatedly applying it with an acid-alcohol solution (chandelier) and then ironing on the wide-pass ironing machine at a working roll temperature of 170 ° -90 °.
However, the effect achieved is reversible. Therefore, the most common problem in “sheepskin” products is the specific modification of the hair cover when operated under the influence of environmental factors (rain, snow) and “cleaning up” (removal of contaminants and stains). The hairline of the product can become crimped again. In such cases, it is difficult to return the product from the sheepskin to its original properties, because under the influence of water and in the presence of surfactants destructive changes occur with structured hair. Even with repeated combing of the comb for the fur, visible improvements with the hair cover will not happen, and all destructive signs of water impact (sunset, loss of brilliance, tortuosity) will remain.
What the same occurs when treated with aqueous compounds (akvachistki) with a structured hair coat of sheepskin?
When treated with aqueous compounds, complex chemical processes occur that are associated with the influence of the aqueous medium in the presence of surfactants on the hairline, and, more precisely, on the components of the chandelier, fixed by thermomechanical and hydrothermal action on the hair during the ennobling operation. In this case, surfactants play the role of a decomposition catalyst (due to the solubilizing ability) of the chandelier components. As a result of chandeliers fixed on the hair covering by thermomechanical and hydrothermal methods, it swells and acquires other physicochemical properties: softness, tackiness, and reduction of adhesive strength. The repeatedly repeated mechanical effect of the napkin when removing contaminants on the “sheepskin” product results in the washing off of the chandelier with the surface of the hairline. Subsequent drying of the product leads to an actual inability to return the original physico-mechanical and aesthetic properties to the scalp.
The plasticized and structured hairline in the product of the sheepskin in the result of the aqua-cleaning performed completely loses the properties specified on the fur production: shine, friability, straightened condition, silky touch.
REFRESHING THE ADJUSTMENT
How to clean a fur product and forget about its lining? Let it be the most inconspicuous part of clothing, but it is it that comes into contact with the body, absorbs the smell, it can have strong stains from road dirt and reagents, specific stains from perfumes, deodorants, etching from sweat and drinks spilled on the product. A contaminated lining spoils the skin, and this in turn can affect the fur. Therefore, you should not postpone cleaning for later, it should be done in a timely manner, if contamination is detected.
Of course, you can turn to dry cleaning, but you do not always have such an opportunity. Well, if the lining is unfastened, and it is easy to wash. In the opposite case, you can use the tools BIOFUR.
How to clean fur lining?
The main problem with the processing of the lining is a high probability of wetting the skin. One wrong step and you can ruin an expensive thing. Therefore, information on how to clean the lining using BIOFUR will be useful.
If there are spots on the lining, you need to remove them first of all with the BIOFUR deep cleaning foam, gently wiping with the BIOFUR brush. The treatment of the contaminated area of the lining should be done in a circular motion, moving from the edge of the stain to the middle, holding the lining with one hand to prevent wetting of the masdra, and the other to wipe the contamination with a brush. Then wipe the cloth with a BIOFUR wet wipe, removing the dirt particles and the applied agent. After applying the foam, you do not need to use the BIOFUR Cleaner on the lining.
When you use the product very often on the lining of the fur coat there are stains from snow, road reagents and sweat stains. To deal with this problem will also help the BIOFUR Cleaner. It needs to be sprayed evenly over the entire surface of the selected section of the lining. Then wipe the cloth with a BIOFUR wet wipe, flushing the applied agent. Be careful and make sure that the fur of the fur remains dry. After this, it is necessary to wipe the lining with a dry towel. Do not dry the lining with a hairdryer or on a heater.
How do I clean the inside of the hat?
Proper care of the fur is not only prolongs their life, from clothes grooming depends human health. Dirty inside hats, for example, can cause alopecia (baldness). To put them in order, clean enough cap BIOFUR means.
Often, the edges of the inner side of the cap from the long socks acquire an untidy “greasy” appearance, in which a lot of malignant bacteria accumulate. Of course, you can include a headdress in a dry cleaner, but you can use the BIOFUR deep cleaning foam to clean the “greasy” areas and other contaminants.
To begin with, the headpiece should be turned inside out, fur inside. Inspect the lining, places with strong contaminants treated with BIOFUR deep cleaning foam, gently wiping them with a BIOFUR brush. The treatment of the contaminated area should be done in circular motions, holding the lining with one hand to prevent wetting of the masdres, and the other to wipe the contamination with a brush. Then wipe the cloth with a BIOFUR wet wipe, removing the dirt particles and the applied agent. After this, it is necessary to wipe the lining with a dry towel. Do not dry the lining with a hairdryer or on a heater.
WELTING THE FUR
White fur looks great. He is young and refreshing his complexion. But over time, white fur gets an unpleasant yellow tint. Yellowing fur in professional language is called “burnout”.
What is burnout and where does it come from?
Under the influence of the sun, the influence of the environment and lighting devices, the natural fur of light tones acquires a yellow tinge. The yellowness of the fur is chemical burnt. The reason for the burn is the chemical compounds that were not completely removed when the fur was made, and in the process of wearing the product, these compounds are oxidized in the structure of the hair, giving it a yellow tinge. Already appeared “yellowness” of fur can not be removed. However, the yellowing of the fur can be prevented if regular maintenance of the fur is carried out regularly. Thus, the chemical compounds will be regularly scraped off the surface of the hair and the oxidation process will slow down.
It is not recommended to remove the “yellowness” of the fur with hydrogen peroxide, since it is possible to burn the fur, and it will start to climb or break. Dry dry cleaners eliminating the “yellowness” of fur is also not available, because they clean it with perchlorethylene, which will even more add chemistry to your fur product.
However, if you carry out regular preventive care of fur with BIOFUR products – you can prevent the appearance of an unfavorable yellow shade of fur.
Fur product does not look like they used to? Pile on fur products dimmed and hesitated on its details appeared wrinkles, it has not been used for a long time and was in the bag? This means that you just need to make fur treatment with BIOFUR.
BIOFUR is the ideal solution for proper fur care, allowing you to preserve the original freshness and restore the natural shine of fur so that the fur coat does not lose its beautiful appearance and you could enjoy your favorite fur product for many years.
Fur is not only an indicator of status, but also a good protection from wind and cold. In order for it to serve for a long time and remain beautiful, it must be properly cleaned. Sets of BIOFUR products are suitable for cleaning all types of fur: mink, fox (fox), Arctic fox, raccoon, beaver, rabbit, etc.
Cleaning fur products depends on several factors: the length of the pile and type of pollution.
With prolonged wear, especially of products with long nap, dusting and hair trimming (hair tangling, forming felt-like “lumps” and “balls”), which are reflected in the “drawing” of the fur product, it loses its natural shine and attractiveness.
In order to clean the fur from dirt and eliminate svoyarachivanie you need to use the Cleaner or BIOFUR Restorer. Whichever of the means you choose, it must be applied to the product with a thin layer over the entire surface. After that, clean with a damp cloth BIOFUR, previously moistened in water and wrung out, rubbing fur in the direction of growth of the villi. Repeat the procedure several times to remove particles of dirt and applied product, but you should beware of blotting of the masdra. Dried fur products must be combed in the direction of the natural tilt of the hair. The treatment of the felted section of fur should start from the edge of the upper part of the hair, holding the area to be weighed with the left hand, while combing the right with the right hand from the top down and gradually penetrating to the skin itself.
Greasy stains, stains from products and cosmetics placed on small parts of fur with long nap, first washed with a clean soft cloth BIOFUR, which was previously moistened in water and wrung out. Spots are wiped in the direction of growth of the villi, so that the contamination is not “hammered” into the nap. After, in order to clear the fur from the traces of dirt, it is necessary to use the Penka deep effect BIOFUR. The foam should be applied with a BIOFUR brush in the direction of growth of the villi, as if combing the fur. Then wipe the fur with a wet BIOFUR napkin in the direction of growth of the villi. Repeat the procedure several times to remove particles of dirt and applied product, but you should beware of blotting of the masdra. The dried out section of the fur product must be combed in the direction of the natural inclination of the hair. After using BIOFUR Foam, use the BIOFUR Cleaner.
Even if there are no stains on the product, it still needs to be cleaned regularly, so that the attractive appearance and shine last for a long time. To do this, use the BIOFUR Restorer.
Cleaning shorthaired fur (mink, beaver, rabbit and others)
With prolonged wear, especially items with short pile, most often appear creases on individual parts and fires in places most often in contact with the human skin, which lead to loss of the original freshness and attractiveness of appearance.
In order to freshen the fur and restore the natural shine, you need to use the BIOFUR Cleaner or Rebuilder. Whichever of the means you choose, it must be applied to the product with a thin layer over the entire surface. After that, clean with a damp cloth, previously moistened in water and wrung out, and wipe the fur in the opposite direction of growth of the villi. Repeat the procedure several times to remove particles of dirt and applied product, but you should beware of blotting of the masdra. Dried fur products must be combed in the direction of the natural tilt of the hair.
Greasy stains, stains from products and cosmetics, planted on small areas of fur with a short pile, first washed with a clean soft cloth BIOFUR, which was previously moistened in water and wrung out. Spots rub in the direction of growth of villi. After, to clean the fur from the traces of dirt, you need to use Penka BIOFUR. The foam should be applied with a BIOFUR brush against and in the direction of growth of villi in order. Then, with a wet BIOFUR napkin, wipe the fur in the direction of growth of the villi. Repeat the procedure several times to remove particles of dirt and applied product, but you should beware of blotting of the masdra. Dry the fur product comb in the direction of the natural tilt of the hair. After using the BIOFUR deep foam, use the BIOFUR Cleaner.
Even if the product has no stains, it still needs to be cleaned regularly, so that the attractive appearance and shine persisted for a long time. To do this, use the BIOFUR Restorer.
What should be protected from a fur coat!
1. Direct sunlight.
Natural fur does not like bright, especially artificial light. Over time, under the influence of the sun and the influence of the environment, the bright furs acquire an unpleasant yellow tinge. Completely get rid of yellowness impossible. However, the yellowing of the fur can be prevented if regular maintenance of the fur with BIOFUR (reductant) is carried out regularly.
2. Harmful insects.
Mole very fond of fur products, especially those that hang for a long time in the closet and they have not been remembered for a long time. To save a fur coat from pests it is possible with the help of correct storage in the perforated covers, and next it is necessary to put a bag of lavender.
With foundation and perfume, you need to be extremely careful. Apply perfume need in advance, and put on the fur coat only after it completely dries. The tonal cream on the face is also dangerous – it is better to put a scarf or scarf on your neck, which will become a protective layer between the fur coat and the skin of the face, covered in tone.
If your product already has cosmetic spots, you need to use the BIOFUR tools:
For freshly-picked stains – use BIOFUR “EXPRESS-CARE” (wet cleaning cloth);
For previously received contaminants, use the BIOFUR complex care kit (deep impact foam, cleaner).
4. Suede and nubuck accessories.
If your bag is made of such materials, be careful that it does not come into contact and especially not rubbed against fur, especially light. The fur coat can be painted in the color of the bag after such “communication”.
Transportation of finished products is carried out by all modes of transport, in covered vehicles, in accordance with the rules applicable to this type of transport.
The products are stored in covered dry premises, at a temperature not exceeding 40 ° C and not below 0 ° C, at a distance of not less than 1 m from heating devices in conditions that exclude the action of corrosive media. Within a month, it is allowed to store and transport products at a temperature of minus 40 ° C. After freezing and subsequent thawing, the product retains its properties.
Storage near open flames and in direct sunlight is not allowed.
Manufacturer: BIOFUR Limited Liability Company
Production location: unit 1, 60 Stantsionnaya St., Novosibirsk, Russia
Contact phone in Novosibirsk: 8-383-216-20-02
Free line for inquiries for all regions: 8-800-500-43-67
On cooperation issues: firstname.lastname@example.org
On the question of payment and delivery: email@example.com